Undergraduate Degree Plan
Engineering majors must earn a grade of C- or better in all engineering, mathematics, and science courses. No grade lower than C- will be accepted on any courses transferred to the University of Houston. Students must earn a 2.250 grade point average in all courses and in INDE major courses in order to enroll in 3000-level and above INDE courses. A major grade point average of 2.000 or better is required for graduation. The major grade point average is calculated using all INDE courses.
Visit the University Catalog for course descriptions.
| First Year4 | ||
|---|---|---|
| Fall Semester | Hours | |
| CHEM 1372 | Chemistry for Engineers | 3 |
| CHEM 1117 | Fundamentals of Chemistry for Engineers Laboratory | 1 |
| ENGl 1303 | Freshman Composition I | 3 |
| HIST 1376 or 1377 | The United States to 18771 | 3 |
| MATH 1431 | Calculus I2 | 4 |
| LPC Core Course | 3 | |
| Total | 17 | |
| Spring Semester | Hours | |
| INDE 1331 | Computing for Engineers | 3 |
| ENGL 1304 | Freshman Composition II | 3 |
| HIST 1378 or 1379 | The UnitedStates History since 18771 | 3 |
| MATH 1432 | Calculus II | 4 |
| PHYS 1321 | University Physics I | 3 |
| Total | 16 | |
| Second Year | ||
|---|---|---|
| Fall Semester | Hours | |
| INDE 2333 | Engineering Statistics I | 3 |
| INDE 3330 | Finance and Cost Management | 3 |
| MATH 2433 | Calculus III | 4 |
| PHYS 1322 | University Physics II | 3 |
| INDE 2331 | Computer Apps. For Industrial Engineers | 3 |
| Total | 16 | |
| Spring Semester | Hours | |
| MECE 3400 | Introduction to Mechanics | 4 |
| ENGI 2304 | Technical Communication | 3 |
| INDE 3333 | Engineering Economy I | 3 |
| POLS 1336 | U.S. and Texas Constitutions and Politics1 | 3 |
| MATH 3321 | Engineering Math | 3 |
| Total | 16 | |
| Third Year | ||
|---|---|---|
| Fall Semester | Hours | |
|
INDE 3382 (INDE 4371) |
Scholastic Models | 3 |
|
INDE 3364 (INDE 4364) |
Engineering Statistics II | 3 |
|
INDE 3432 (INDE 3431) |
Manufacturing Processes | 4 |
| INDE 3310 | Quality Control | 3 |
| POLS 1337 | U.S. Govt: Congress: President and Courts 1 | 3 |
| Total | 16 | |
| Spring Semester | Hours | |
|
INDE 3362 (INDE 3361) |
Computer Aided Design / Manufacturing | 3 |
| INDE 4331 | Analysis of Industrial Activities | 3 |
| INDE 4369 | Facilities Planning | 3 |
| INDE 3381 | Linear Optmization | 3 |
| Creative Arts Core Course | 3 | |
| Total | 15 | |
| Fourth Year | ||
|---|---|---|
| Fall Semester | Hours | |
| INDE 3370 | Discrete Event Simulation | 3 |
| INDE 4111 | Industrial Engineering Seminar | 1 |
| INDE 3320 | Computer Integrated Manufacturing | 3 |
| ECE 3336 | Introduction to Circuits and Electronics | 3 |
| ENGl 2334 | Thermodynamics | 3 |
| Social Science Core Course (writing intensive) | 3 | |
| Total | 16 | |
| Spring Semester | Hours | |
| INDE 3315 | Suppy Chain Management | 3 |
| INDE 4334 | Engineering Systems Design | 3 |
| INDE 4337 | Human Factors and Ergonomics | 3 |
| INDE 4372 | Operations Control | 3 |
| Technical Elective11 | 3 | |
| Total | 15 | |
|
Degree Total Hours: 127 |
1 Refer to the University of Houston Admissions website for information on equivalents and substitutions and for information on advanced placement examinations.
2 Students not qualified to enter MATH 1431 must complete MATH 1300, 1310 and/or 1330, as indicated by results of the Mathematics placement examination, prior to enrolling in MATH 1431
4 This degree may require three additional semester hours. Note the graphics requirement described under this department section.
11 Approved technical courses are MATH 3336, 3333, MANA 3335, MIS 3370, INDE 4397, INDE 4373. Other technical courses must be approved in advance by the Industrial Engineering departmental advisor.
Industrial Engineering Degree Program for Other UH Engineering Graduates
Students who have completed a Bachelor of Science at the University of Houston in another field of engineering may obtain a Bachelor of Science in Industrial Engineering degree by completing, at the University of Houston, the additional year of course work shown below. Required prerequisites for this program are INDE 2333 and 3333, in addition to those courses required for the first degree.
| INDE 3330 | Industrial Cost Systems | 3 |
|
INDE 3362 (INDE 3361) |
Computer Aided Design / Manufacturing | 3 |
|
INDE 3364 (INDE 4364) |
Engineering Statistics II | 3 |
|
INDE 3382 (INDE 4371) |
Stochastic Models | 3 |
|
INDE 3381 (INDE 4333) |
Linear Optimization | 3 |
|
INDE 3432 (INDE 3431) |
Manufacturing Processes | 4 |
| INDE 4331 | Analysis of Industrial Activities | 3 |
|
INDE 4369 (INDE 4368) |
Facilities Planning and Design | 3 |
| INDE 4372 | Operations Control | 3 |
| Technical Elective15 | 3 | |
| Total for Additional Degree | 31 |
Courses must be approved by the Industrial Engineering departmental advisor.